Designed for Quads using 7mm-8.5mm brushed motors,
ARM STM32F7 processor,
USB socket for firmware flashing and parameter editing,
MPU6500 Gyro/Accelerometer connected via SPI,
4 x 9.5A Mosfets,
Dip switch for both Bind and Boot loader mode,
1.25mm Motor sockets for easy motor connection,
Runs BetaFlight firmware,
DSM2/DSMX Sat receiver socket,
2 Layer board design,
Dimensions: 28mm x 32mm.
This board can be ordered from OSHpark.
Use this file to create a Stencil on OSH Stencils.
The BOM can be downloaded here.
The Schematic can be downloaded here.
The Board Layout can be downloaded here.
Released under the Creative Commons
Attribution NonCommercial NoDerivatives 4.0 License.
Made available without any Express or Implied Warranties
Please get the firmware for the AlienFlightNG F7 from here, The firmware target will soon be added to the Betaflight GUI.